Niccau Industries cable manufacturing house wiring to 765kV EHV conductors and accessories
๐Ÿ”Œ Niccau Industries Limited โ—† StenJaan Group ๐ŸŒ DomEx TradLink โ€” Export

Cable & Cable Accessories

House Wiring Cables ย โ—‡ย  LV / MV / HV / EHV Power Cables ย โ—‡ย  Solar DC Cables ย โ—‡ย  ACSR / AAAC / HTLS Conductors ย โ—‡ย  765kV ย โ—‡ย  Underground Cable Accessories ย โ—‡ย  Transmission Line Accessories ย โ—‡ย  Cable Management

Niccau Industries Limited manufactures, imports, and exports the complete range of cables and cable accessories โ€” from 0.5mmยฒ FR PVC house wiring wire to 765kV XLPE underground EHV cable; from simple insulated building wire to torsion-resistant wind turbine cables; from ACSR Weasel for 11kV distribution lines to HTLS conductors for 765kV transmission superhighways. Every cable is IS / IEC certified, BIS approved, and backed by Niccau Industries' quality systems and BARREL Group's 5,000 MW project pipeline.

0.5mmยฒSmallest โ€” House Wire
765kVHighest โ€” EHV Cable
500+Cable SKUs
IS / IECEvery Product Certified
BISBureau of Indian Standards
54+Export Countries
๐Ÿ”Œ Niccau Industries โ€” Cable Division

India's Complete Cable Manufacturer โ€” 1.1V to 765kV

Niccau Industries Limited's Cable Division is one of India's most comprehensive cable manufacturers โ€” producing and supplying the complete voltage spectrum from 0.5mmยฒ household wiring wire to 765kV EHV underground cables, ACSR / AAAC / HTLS overhead conductors, solar DC string cables, flexible winding wires, specialty marine and wind turbine cables, and the full range of cable accessories for all applications.

As the in-house cable supplier for BARREL Group's 5,000 MW project pipeline, Niccau Industries cable products are proven in real Indian field conditions โ€” from the salt-spray coastal environments of Tamil Nadu and Gujarat, to the desert heat of Rajasthan, to the high-altitude cold of Ladakh. Every cable shipped by Niccau carries a BIS test certificate, batch MTC, and delivery inspection record.

Manufacturing: IS 694 | IS 1554 | IS 7098 | IS 8130 | IS 9968 | IS 13573 | IS 398 | IEC 60502 | IEC 62930 | IEC 61089 | TรœV | BIS certified

๐Ÿญ In-House Manufacturing โœ… BIS / IS / IEC Certified ๐ŸŒ Export via DomEx TradLink ๐Ÿ”Œ 0.5mmยฒ to 765kV
Industries Limited โ€” Cable Division

An Associate of

BARREL / StenJaan Group

Export through DomEx TradLink
๐Ÿ 

House & Building Wires

FR / FRLS / LSZH โ€” 0.5mmยฒโ€“16mmยฒ

โšก

LV Industrial Cables

0.6/1kV PVC / XLPE armoured

๐Ÿ”Œ

MV Power Cables

1.1kV to 33kV XLPE underground

โšก

HV / EHV Cables

66kV to 765kV XLPE underground

โ˜€๏ธ

Solar DC Cables

1000V / 1500V โ€” IEC 62930

๐Ÿ”€

OHL Conductors

ACSR / AAAC / HTLS / OPGW โ€” 765kV

๐Ÿ”ง

Specialty Cables

Wind, marine, mining, submersible

๐Ÿ”Œ

UG Cable Accessories

Joints, terminations โ€” LV to EHV

โšก

TL Accessories

Clamps, dampers, hardware โ€” 765kV

Products:
๐Ÿ 
House Wiring & Building Cables

Niccau Industries manufactures the complete range of building wires and cables for residential, commercial, and light industrial applications โ€” FR PVC, FRLS, LSZH/halogen-free, flexible cordage, co-axial, telephone, LAN, and flat wires. All IS 694 / IS 8130 BIS certified. Available in 1.5mmยฒ to 16mmยฒ in standard and premium ranges.

FR PVC house wiring single core copper conductor IS 694
FR PVC0.5mmยฒโ€“16mmยฒ | 1100V

FR PVC Insulated Single Core House Wiring Cable

Flame retardant PVC insulated copper conductor โ€” the standard for Indian residential and commercial building wiring

Technical Specifications

Cross-section: 0.5 / 0.75 / 1.0 / 1.5 / 2.5 / 4 / 6 / 10 / 16mmยฒ Voltage: 1100V (IS 694) Conductor: Electrolytic copper โ€” Class 1 / 2 Insulation: Flame Retardant PVC (FR) Colour: Red / Black / Blue / Yellow / Green Temperature: โ€“15ยฐC to +70ยฐC continuous Packing: 90m / 100m / 180m coil / 500m drum FR: Flame test passes IEC 60332-1 Standard: IS 694 : 2010 / BIS certified OD: As per IS 694 table Applications: House / commercial wiring Warranty: Manufacturer's quality guarantee
BIS IS 694FR flame retardantElectrolytic CuResidential
IS 694IS 8130BIS
FRLS LSZH halogen free building wire low smoke zero halogen
FRLS / LSZHLow Smoke Zero Halogen

FRLS / ZHFR / LSZH Building Wire โ€” Low Smoke Zero Halogen

Fire resistant low smoke, zero halogen โ€” mandatory for hospitals, airports, data centres, malls, schools, and public buildings

Technical Specifications

Cross-section: 1.0 / 1.5 / 2.5 / 4 / 6 / 10 / 16mmยฒ Voltage: 1100V Conductor: Annealed copper Class 2 Insulation: LSZH / ZHFR compound Smoke: IEC 61034 >60% light transmittance Halogen: IEC 60754-1 โ€” <0.5% HCl Flame Retardance: IEC 60332-3 Cat C Oxygen Index: >30% Temperature: โ€“20ยฐC to +75ยฐC Standard: IS 694 / IEC 60227 Applications: Hospital, airport, data centre BIS: Certified batch-wise
Zero halogenLow smokeIEC 61034Hospital grade
IS 694IEC 60754IEC 61034
flexible copper core multicore cordage wire flat cable
Flexible CordageFlat / Round / Parallel

Flexible Wires, Cordage & Flat Twin Cables

Multi-strand flexible copper wires for appliances, extension cords, pendant wiring, and light-duty applications

Technical Specifications

Cross-section: 0.5 / 0.75 / 1.0 / 1.5 / 2.5mmยฒ Cores: 2 / 3 / 4 cores + earth Type: Flat twin / round parallel / twisted Conductor: Class 5 fine-strand flexible Insulation: PVC โ€” IS 9968 Sheath: PVC โ€” textured finish Voltage: 300/500V (H05VV-F / IS 9968) Temp: โ€“15ยฐC to +60ยฐC Applications: Fan, heater, table lamp Colours: Grey / white / black standard Standard: IS 9968 Part 1 / IEC 60227-5 BIS: Certified under IS 9968
Fine strand Class 5IS 9968Flat + roundAppliance ready
IS 9968IEC 60227BIS
More Building & House Wiring Products
๐Ÿ”Œ

Co-Axial & TV Cables

  • RG6 / RG11 co-axial cable
  • 75ฮฉ โ€” CATV / satellite / CCTV
  • CT100 / CT125 grade
  • Quad shielded options
๐Ÿ“ž

Telephone / Data Cables

  • Telephone cable 2Pโ€“100P twisted pair
  • LAN CAT5e / CAT6 / CAT6A UTP/FTP
  • Indoor / outdoor rated
  • IS 7564 / EIA/TIA 568B
๐Ÿˆš

Multicore Sheathed Cables

  • 2C / 3C / 4C PVC sheathed
  • Flexible / semi-rigid
  • For wiring harness, AV equipment
  • IS 694 / IS 9968
๐Ÿšซ

Fire Resistant Cables (CI)

  • Circuit integrity โ€” 180 min fire survival
  • IEC 60331-1 / IS 17048
  • Fire exits, emergency systems
  • LSZH + mineral insulation option
โš™๏ธ

Control & Instrumentation

  • Multicore control cable 2Cโ€“61C
  • Twisted pair / individual screened
  • IS 1554 / IS 5931 / IEC 60544
  • SCADA / DCS wiring
๐Ÿ”ฅ

Winding Wires (Magnet Wire)

  • Enamelled copper wire โ€” Round
  • Strip / rectangular โ€” transformer
  • Class B / F / H insulation
  • IS 13730 / IEC 60317
โšก
LV Industrial Power & Control Cables โ€” 0.6/1 kV

Niccau Industries manufactures LV power cables โ€” PVC and XLPE insulated, armoured (SWA/AWA) and unarmoured, single core to 4-core, for industrial plants, solar AC output, DG sets, motor feeders, and distribution. IS 1554 / IS 7098 Part 1 / IEC 60502-1 certified. Also: XLPE/PVC control cables, instrumentation cables, multicore shielded cables.

LV armoured XLPE PVC power cable SWA 0.6kV 1kV industrial
LV Power Cable0.6/1 kV XLPE / PVC

LV Armoured Power Cable โ€” XLPE / PVC, SWA / AWA

Single and multicore LV power cables for industrial feeders, solar AC output, DG sets, and distribution panels

Technical Specifications

Voltage: 0.6/1 kV Cross-section: 1.5mmยฒ โ€“ 630mmยฒ Cu / Al Cores: 1C / 2C / 3C / 3.5C / 4C Insulation: XLPE or PVC Armour: SWA (steel wire) / AWA / STA Sheath: PVC / LSZH outer Conductor: Stranded Cu or solid Al Temperature: 90ยฐC XLPE / 70ยฐC PVC Short Circuit: 250ยฐC (XLPE) / 160ยฐC (PVC) Standard: IS 1554 / IS 7098 Part 1 Packing: Wood drum โ€” 500m / 1000m BIS: IS 7098 Part 1 certified
XLPE 90ยฐCSWA armouredIS 1554Cu / Al core
IS 1554IS 7098-1BIS
Control cable multicore screened instrumentation PLC SCADA
Control CableMulticore | Screened

Multicore Control & Instrumentation Cable

2C to 61C screened and armoured control cables for SCADA, PLC, DCS, panel wiring, and motor controls

Technical Specifications

Voltage: 660V / 1100V Pairs / Cores: 2C to 61C or 1P to 50P Cross-section: 0.5 / 0.75 / 1.0 / 1.5 / 2.5mmยฒ Conductor: Stranded tinned / bare Cu Insulation: PVC / XLPE / LSZH Screen: Al foil overall / individual pair Drain wire: Cu/TC drain for shielding Armour: SWA / STA / unarmoured Sheath: PVC grey / LSZH Standard: IS 1554 / IS 5931 / IEC 60544 EMI: Individual / overall screen available Applications: SCADA / PLC / DCS / drives
Individual screenOverall shieldIS 1554SCADA / DCS
IS 1554IS 5931IEC 60544
LSZH fire resistant LV industrial cable flame retardant
FR / FRLS / LSZHLow Smoke Zero Halogen

FRLS / LSZH LV Industrial Cable โ€” Fire Safe

Flame retardant low smoke halogen-free industrial cables for power plants, refineries, metros, and tunnels

Technical Specifications

Voltage: 1.1kV Cross-section: 1.5mmยฒ โ€“ 400mmยฒ Cores: 1C / 2C / 3C / 3.5C / 4C Insulation: LSZH / XLPE fire-resistant Smoke: IEC 61034 โ€” >60% LT Halogen: IEC 60754 โ€” <0.5% HCl Flame: IEC 60332-3 Cat A/B/C Oxygen Index: >32% (ASTM D2863) CI (Circuit Integrity): 30/60/90/120 min Armour: SWA / unarmoured Standard: IS 17048 / IEC 60502 Applications: Power plant, metro, tunnel
CI 120 min optionLSZH compoundIEC 60332-3Metro / tunnel
IS 17048IEC 60502IEC 61034
๐Ÿ”Œ
Medium Voltage Cables โ€” 1.1 kV to 33 kV

Underground MV XLPE insulated cables for solar project collection systems, wind farm inter-array circuits, industrial plants, and DISCOM distribution networks โ€” 1.1kV, 3.3kV, 6.6kV, 11kV, 22kV, and 33kV. IS 7098 Part 1 & Part 2 / IEC 60502-2 certified. Single core and three core โ€” Cu and Al conductor.

11kV XLPE underground cable armoured medium voltage solar
MV XLPE3.3kV / 6.6kV / 11kV

3.3kV, 6.6kV & 11kV XLPE Underground Cable

Underground MV cables for solar/wind collection, HT industrial feeders, and distribution network extension

Technical Specifications

Voltage: 3.3kV / 6.6kV / 11kV (Uo/U) Cross-section: 16mmยฒ โ€“ 630mmยฒ Cu / Al Core: 1C / 3C single or multi-core Conductor: Stranded Cu (Class 2) / Al Semi-con: Inner + outer semi-conducting screen Insulation: XLPE โ€” high purity extruded Metallic Screen: Cu tape / Cu wire Armour: SWA / AWA / flat wire Outer Sheath: HDPE / PVC Temp: 90ยฐC continuous / 250ยฐC SC Standard: IS 7098 Part 2 / IEC 60502-2 BIS: Certified with type test reports
XLPE dry-curedCu screenIS 7098-2Solar collection
IS 7098-2IEC 60502-2BIS
33kV XLPE cable solar wind power collection system underground
MV XLPE22kV / 33kV

22kV & 33kV XLPE Underground Power Cable

Underground 22kV and 33kV XLPE cables for primary distribution, solarโ€“substation connections, and HV switchgear feeders

Technical Specifications

Voltage: 22kV / 33kV (12.7/22kV, 19/33kV) Cross-section: 35mmยฒ โ€“ 1000mmยฒ Cu / Al Core: 1C or 3C Conductor: Stranded Cu or Al โ€” Class 2 Semi-con: Extruded XLPE triple-layer Insulation: XLPE โ€” partial discharge <5pC Screen: Cu tape / Cu wire screen Bedding: PVC inner sheath Armour: Round wire / flat wire Outer Sheath: HDPE / PVC black Standard: IS 7098 Part 2 / IEC 60502-2 Testing: Type test + routine test
PD <5pCTriple-layer XLPEType testedHDPE sheath
IS 7098-2IEC 60502-2BIS
MV cable drum joint termination accessories kit
MV Solar CableSolar Collection 0.6/1kVโ€“33kV

Solar Power Plant Cable Package โ€” Full BOM

Complete cable supply for solar power plants โ€” DC string cable, AC LV output, MV collection, and substation HV cable as a project package

Solar Cable Package Includes

DC: Solar string cable 4mmยฒ/6mmยฒ 1500V DC Trunk: 10โ€“35mmยฒ 1500V DC AC LV: Inverterโ€“trafo 0.6/1kV MV Collection: 11kVโ€“33kV XLPE HV: 66kV / 132kV grid connection Control: 2Cโ€“61C for SCADA wiring Earth wire: GI strip / bare Cu rope Fibre: OPGW / ADSS for communication All cable accessories incl. quote BOM preparation: Within 48 hours Delivery: As per project schedule TPI: Available on request
Complete project BOMDC to HVSCADA included48-hr BOM quote
IEC 62930IS 7098BIS
โšก
HV & EHV Underground Cables โ€” 66 kV to 765 kV

High voltage and extra high voltage XLPE underground cables for major grid infrastructure โ€” 66kV, 132kV, 220kV, 400kV, and 765kV. Dry-cured triple-extrusion XLPE technology, partial discharge <2pC, copper wire screen, HDPE outer sheath, and pre-moulded accessories. IS 7098 Part 3 / IEC 60502-4 / PGCIL specification compliant.

66kV 132kV XLPE underground HV cable single core copper
HV XLPE66kV / 132kV

66kV & 132kV XLPE Underground Cable

High voltage XLPE cables for inter-substation links, grid augmentation, and underground urban HV circuits

Technical Specifications

Voltage: 66kV (38/66kV) / 132kV (76/132kV) Cross-section: 95mmยฒ โ€“ 2000mmยฒ Cu / Al Core: Single core (laid in trefoil) Conductor: Miliken stranded Cu / Al compact Semi-con: Triple-extrusion dry-cured XLPE PD Level: <2pC at 2Uo โ€” highest purity Screen: Cu wire screen โ€” corrugated Al option Bedding: Semiconducting water-blocking tape Armour: Round wire / flat wire Outer Sheath: HDPE โ€” UV black Standard: IS 7098 Part 3 / IEC 60502-4 Testing: Type test (IEC 60840) + FAT + site
PD <2pCMiliken conductorIEC 60840Type tested
IS 7098-3IEC 60502-4IEC 60840
220kV 400kV XLPE EHV underground cable grid PGCIL
EHV XLPE220kV / 400kV

220kV & 400kV XLPE Underground EHV Cable

Extra high voltage underground cables for ISTS grid connections, large solar / wind evacuation, and metro grid networks

Technical Specifications

Voltage: 220kV (127/220kV) / 400kV (230/400kV) Cross-section: 400mmยฒ โ€“ 3000mmยฒ Cu / Al Core: Single core โ€” trefoil installation Conductor: Miliken segmental โ€” low AC resistance Insulation: Dry-cured XLPE โ€” UHV grade PD Level: <1pC at 2Uo Screen: Corrugated Al sheath + Cu wire Water blocking: Longitudinal + radial Outer Sheath: HDPE 3mm โ€” tracked Standard: IEC 60840 / IEC 62067 PGCIL: Specification compliant FAT: Full factory acceptance test
PD <1pCCorrugated Al sheathIEC 62067PGCIL spec
IEC 60840IEC 62067PGCIL
765kV XLPE underground ultra high voltage cable UHV
UHV XLPE765kV

765kV XLPE Underground UHV Cable

India's highest voltage underground cable โ€” for major ISTS infrastructure, urban underground transmission, and EHV grid links

Technical Specifications

Voltage: 765kV (441/765kV) system voltage Cross-section: 1600mmยฒ โ€“ 3500mmยฒ Al / Cu Core: Single core โ€” flat formation Conductor: Miliken compact Al / Cu XLPE: Ultra-high purity dry-cured PD: <0.5pC โ€” ultra-low level Screen: Corrugated Al sheath + HDPE Water block: Full longitudinal + radial Standard: IEC 62067 / PGCIL UHV spec Accessories: Pre-moulded EPDM joints / terminations Installation: Forced cooling optional Supply: Engineering + cable + accessories package
765kV systemPD <0.5pCIEC 62067PGCIL UHV spec
IEC 62067PGCIL UHVIS 7098-3
โ˜€๏ธ
Solar PV DC Cables & Accessories โ€” 1000V / 1500V

Niccau Industries manufactures solar PV DC string cables, trunk cables, and harness cables to IEC 62930 (TรœV 2PfG 1169) standard โ€” tinned copper conductor, XLPO UV-stabilised insulation, 1500V DC rated, halogen-free, โ€“40ยฐC to +90ยฐC temperature range. Available in 4mmยฒ, 6mmยฒ, 10mmยฒ, 16mmยฒ, 25mmยฒ, 35mmยฒ single core. Custom harness assemblies with MC4 / MC4-EVO connectors.

Solar DC string cable 4mm 6mm tinned copper XLPO 1500V
Solar String DC1500V DC | IEC 62930

Solar PV DC String Cable โ€” 4mmยฒ & 6mmยฒ

Standard solar string cable for module-to-combiner wiring โ€” tinned copper, XLPO insulated, 1500V DC rated

Technical Specifications

Cross-section: 4mmยฒ / 6mmยฒ Voltage DC: 1500V DC (1000V optional) Voltage AC: 0.6/1kV (AC use) Conductor: Class 5 tinned Cu โ€” flexible Insulation: XLPO โ€” cross-linked polyolefin Sheath: XLPO โ€” UV stabilised, halogen-free Temperature: โ€“40ยฐC to +90ยฐC continuous Short circuit: 200ยฐC Colour: Black and Red (pairs or separate) Standard: IEC 62930 / TรœV 2PfG 1169 BIS: IS 16646 certification Packing: 500m / 1000m wooden drum
1500V DCTinned Cu Class 5IEC 62930XLPO UV-stableTรœV certified
IEC 62930TรœVIS 16646
Solar trunk cable 10mm 16mm 25mm DC 1500V combiner
Solar Trunk DC10โ€“35mmยฒ | 1500V DC

Solar DC Trunk Cable โ€” 10mmยฒ to 35mmยฒ

Heavy-gauge DC trunk cables for combiner box to inverter runs โ€” handles multiple parallel string currents at 1500V DC

Technical Specifications

Cross-section: 10 / 16 / 25 / 35mmยฒ DC Voltage: 1500V rated Conductor: Class 5 tinned Cu flexible Insulation: XLPO UV-stabilised Sheath: XLPO โ€” halogen-free outdoor Temp: โ€“40ยฐC to +90ยฐC Current capacity: Per IEC 60364-7-712 Resistance: Colour: Black / Red or custom Packing: 500m drum Standard: IEC 62930 / TรœV BIS: IS 16646
SCB to inverterHigh current capacity1500V ratedIEC 62930
IEC 62930TรœVBIS
Solar cable harness pre-assembled custom length MC4
Custom HarnessPre-Assembled | MC4

Solar Cable Harness โ€” Pre-Cut & Pre-Assembled

Custom-length solar string harness with factory-crimped MC4 / MC4-EVO connectors โ€” ready to plug-in on site

Technical Specifications

Length: Custom cut-to-length as per project Cable: 4mmยฒ / 6mmยฒ XLPO 1500V DC Connectors: MC4 / MC4-EVO โ€” IEC 62852 Crimping: Factory crimped โ€” pull-test verified Pull-out force: >100N per IEC 62852 IP68: Waterproof assembled connector Branch: T-branch Y-connector available Marking: Route label per BOM Qty: From 100 pcs to 5,00,000 pcs Lead time: 2โ€“4 weeks from drawing approval QC: 100% pull-test + continuity test Packing: Coiled โ€” project-labelled
Factory crimped MC4100% pull-testedIP68Plug-and-play
IEC 62852IEC 62930IP68
๐Ÿ”€
Overhead Line Conductors โ€” Distribution to 765kV Transmission

Niccau Industries manufactures all standard overhead conductors โ€” All Aluminium Conductor (AAC), All Aluminium Alloy Conductor (AAAC/ACAR), Aluminium Conductor Steel Reinforced (ACSR) from Weasel to Bersimis, Aluminium Conductor Steel Supported (ACSS), High Temperature Low Sag (HTLS-ACCC/ACSS/TW), OPGW (Optical Ground Wire), ADSS fiber cable, and bare copper earthwire. All IS 398 / IEC 61089 certified.

ACSR conductor aluminium steel reinforced distribution transmission
ACSR ConductorWeasel to Bersimis

ACSR โ€” Aluminium Conductor Steel Reinforced

IS 398 Part 2 certified ACSR in all standard sizes โ€” from Weasel (11kV) to Bersimis (765kV EHV transmission)

Standard Sizes Available

Weasel: 21.2mmยฒ Al / 4.4mmยฒ St Rabbit: 50.0mmยฒ Al / 8.0mmยฒ St Dog: 100mmยฒ Al / 16.1mmยฒ St Panther: 261.5mmยฒ Al / 26.2mmยฒ St Moose: 523.7mmยฒ Al / 34.4mmยฒ St Zebra: 428.9mmยฒ Al / 67.1mmยฒ St Bersimis: 591.7mmยฒ Al / 67.7mmยฒ St Drake: 468.7mmยฒ Al / 73.0mmยฒ St Conductor: 1350-H19 Al wire (EC Grade) Steel: IS 7326 / ASTM B498 galvanised Standard: IS 398 Part 2 / IEC 61089 BIS: Certified all sizes
IS 398 Part 2BIS certifiedAll standard sizesWeasel to Bersimis
IS 398-2IEC 61089BIS
AAAC ACAR AAC aluminium alloy conductor overhead line
AAAC / ACAR / AACAl Alloy Conductor

AAAC, ACAR & AAC โ€” Aluminium Alloy Conductors

Lightweight high-strength aluminium alloy conductors for coastal zones, corrosive environments, and long-span lines

Technical Specifications

AAC: All Aluminium Conductor (IS 398 Part 1) AAAC: 6201-T81 Al alloy (IS 398 Part 4) ACAR: Al core + Al alloy reinforcement Alloy: 6201-T81 / 1350-O as applicable Cross-section: 25mmยฒ โ€“ 750mmยฒ AAAC Conductivity: 52.5% IACS (AAAC) Strength: 20% higher than ACSR same weight Corrosion resistance: Excellent โ€” coastal Advantage: No galvanic bimetallic corrosion Standard: IS 398 Part 1 / 4 / IEC 61089 BIS: Certified batches Applications: Coastal / industrial zones
Coastal safeIS 398 Part 452.5% IACSNo galvanic
IS 398-4IEC 61089BIS
HTLS ACSS ACCC high temperature low sag conductor 765kV
HTLS ConductorHigh Temp Low Sag

HTLS Conductor โ€” ACSS, ACSS/TW, ACCC, Gap Type

High temperature low sag conductors for line uprating โ€” 2ร— current capacity on existing towers without new structures

Technical Specifications

ACSS: Al conductor steel supported โ€” 250ยฐC ACSS/TW: Trapezoidal wire โ€” compact ACCC: Carbon composite core โ€” 180ยฐC Gap Type: Gap between Al and steel core Operating Temp: 150ยฐC โ€“ 250ยฐC continuous Sag at max temp: Equal to ACSR at 75ยฐC Current: 1.5ร— to 2ร— ACSR capacity Core: ACSS โ€” high strength galv. steel Al: Annealed 1350-O (ACSS) Voltage: Used up to 765kV towers Standard: IS 398 / CIGRE TB 207 Application: Uprating without new towers
250ยฐC operating2ร— currentNo new towersLine uprating
IS 398CIGRE TB 207PGCIL
OPGW optical ground wire fiber communication transmission
OPGWOptical Ground Wire

OPGW โ€” Optical Ground Wire

Dual-function โ€” earth wire protection + optical fiber communication on the same conductor for transmission lines

Technical Specifications

Fiber Count: 12F / 24F / 48F / 96F / 144F Fiber Type: G652D / G655 single mode Construction: Central tube / stranded tube Wire: Al alloy + galvanised steel wires Short circuit: Rated to line fault current IACS: Matched to line earth wire spec Breaking load: As per line design Temperature: โ€“40ยฐC to +85ยฐC Drum length: 2kmโ€“6km continuous Standard: IEC 60794-4 / ITU-T G652 Ends: Factory-prepared fusion splice ends Accessories: Dead-end, suspension clamp
Up to 144FG652D single modeIEC 60794-4Earth + fiber
IEC 60794-4ITU-T G652PGCIL
ADSS all dielectric self supporting fiber cable pole span
ADSSAll-Dielectric Self-Supporting

ADSS โ€” All-Dielectric Self-Supporting Fiber Cable

Non-metallic fiber cable for installation on existing distribution lines and poles โ€” no grounding, no insulation required

Technical Specifications

Fiber Count: 2F / 4F / 6F / 12F / 24F / 48F Fiber Type: G652D single mode Span: Medium span (<200m) / Long span (<600m) SML: 15kN / 25kN / 40kN as per span Construction: AT/AP dual jacket for HV AT Track: Anti-tracking outer sheath No metallic components โ€” fully dielectric Installation: Existing pole / tower โ€” no downtime Temperature: โ€“20ยฐC to +70ยฐC Standard: IEC 60794-4-20 / ITU-T G652 Application: Rural telecom / DISCOM DAS Accessories: Suspension clamp + down-lead
Non-metallicAnti-tracking ATIEC 60794Rural telecom
IEC 60794-4ITU-T G652BIS
Galvanised steel earth wire guard wire transmission line
Earth WireGuard / Shield Wire

Earth Wire / Guard Wire / Shield Wire

GI / ACSR / AAAC earth wires for lightning protection of all overhead transmission and distribution lines

Technical Specifications

GI Earth Wire: IS 2141 / IS 4826 galvanised Wire Diameter: 3.15mm / 4.0mm / 5.0mm Construction: 7-wire stranded Tensile: 1400 N/mmยฒ (EG) / 700 N/mmยฒ (SG) ACSR Earth Wire: As per line design AAAC-S Earth Wire: Alloy 6201 Coating: Triple coat hot-dip galvanising Coating: 305 g/mยฒ Zn coating IS 4826 Drum length: 1000m โ€“ 3000m per drum Standard: IS 2141 / IEC 61232 PGCIL: Heavy zinc coating grade Application: All voltage class lines
IS 2141 / IS 4826305 g/mยฒ zinc7-wire strandedPGCIL spec
IS 2141IS 4826IEC 61232
๐Ÿ”ง
Specialty Cables โ€” Wind, Marine, Mining, Submersible & Industrial

Application-specific specialty cables for demanding environments โ€” torsion-resistant wind turbine cables (1M+ flex cycles), marine/offshore cables, mining cables (flame-resistant), submersible pump cables, welding cables, battery cables, instrumentation cables, railway signaling, and defence-grade cables. All certified to applicable IS / IEC / GL standards.

๐Ÿ’จ

Wind Turbine Cables

  • Torsion-resistant flexible cable
  • 1,000,000+ flex cycles rated
  • 1.8/3kV to 8.7/15kV
  • IEC 62067 / GL type approval
  • 35mmยฒ โ€“ 400mmยฒ cross-section
โ›ฝ

Marine & Offshore Cables

  • IEC 60092 marine power cable
  • MUD / SHF2 flame-retardant
  • Halogen-free marine grade
  • Screened / armoured options
  • IEC 60092 / GL / DNV
โ›ฐ

Mining Cables

  • Trailing cables โ€” opencast mining
  • Flexible rubber-sheathed
  • IS 9968 / IEC 60245 rubber cable
  • Flame-resistant EI / PR insulation
  • 1.1kV โ€“ 33kV for HT mining
๐Ÿ’ง

Submersible Pump Cables

  • Flat / round submersible cable
  • 0.6/1kV โ€” PVC / XLPE
  • Water-resistant insulation
  • IS 694 / IS 1554 water grade
  • 3C + Earth โ€” pump lead cable
๐Ÿ”ฅ

Welding & Battery Cables

  • Welding cable โ€” rubber sheathed
  • IS 9968 / EN 50395 flexible
  • Battery cable โ€” tinned Cu fine strand
  • 1B / 2B / 3B welding grade
  • 16mmยฒ โ€“ 240mmยฒ
๐Ÿ‹‚

Railway & Signaling

  • Railway signaling cable โ€” IS 5532
  • Trackside power cables
  • OHE catenary feeder cable
  • RDSO specification cables
  • EMI-resistant screened
๐Ÿ“‹

Fibre Optic Cables

  • Indoor / outdoor multi-mode / single mode
  • Direct burial armoured (FRPBT)
  • Indoor tight buffer / loose tube
  • G652D / G657A โ€” ITU-T / IEC 60793
โšŒ

Catenary / EHV Aerial

  • EHV aerial bundled conductor (ABC)
  • Catenary wire โ€” bronze / Cu
  • Self-supporting ABC โ€” LV / MV
  • IS 14255 / IEC 62265
โš™๏ธ

High Flex Drag Chain

  • PVC / PUR drag chain cable
  • 10M+ flex cycles
  • Automation / CNC / crane
  • IEC 60228 Class 5/6 ultra-flex
  • Oil-resistant PUR sheath option
๐Ÿ”Œ
Underground Cable Accessories โ€” Joints & Terminations (LV to 765kV)

Complete underground cable accessories โ€” heat shrink, cold shrink, and pre-moulded EPDM / EPR rubber joints and terminations for LV (0.6/1kV), MV (3.3kVโ€“33kV), HV (66kVโ€“220kV), and EHV (400kVโ€“765kV) cables. Straight-through joints, tee joints, stop joints, outdoor terminations, indoor terminations, GIS plug-in connectors, and cable end caps. All IEC 61442 / IS 13573 tested.

Heat shrink cable joint termination LV MV power cable
Heat ShrinkLV / MV Joints & Terminations

Heat Shrink Cable Joints & Terminations

Heat shrink technology joints and terminations for 0.6/1kV to 33kV โ€” straight, tee, and outdoor / indoor termination kits

Products Available

Voltage: 0.6/1kV LV / 3.3 / 6.6 / 11 / 22 / 33kV Joint Type: Straight-through (in-line) Joint Type: Tee joint โ€” branch connection Joint Type: Transition (Cuโ€“Al) joint Termination: Outdoor โ€” 1C/3C sealing end Termination: Indoor โ€” dry type Connection: Compression ferrule / connector Screen: Copper tape / braid reconnection Material: XLPE / EPDM heat shrink tubes Stress cone: Semi-conducting stress relief Standard: IEC 61442 / IS 13573 Brands: 3M, Raychem, Pfisterer, OEM
IS 13573IEC 61442LVโ€“33kV3M / Raychem
IEC 61442IS 13573
Cold shrink pre moulded EPDM HV cable joint termination
Cold Shrink / Pre-MouldedHV 66kVโ€“765kV

Cold Shrink & Pre-Moulded EPDM Joints โ€” HV to EHV

Pre-moulded EPDM and EPR rubber accessories for HV (66kVโ€“220kV) and EHV (400kVโ€“765kV) cable jointing

Products Available

Voltage: 66kV / 132kV / 220kV / 400kV / 765kV Joint: Pre-moulded EPDM straight joint Joint: Taped joint (EPR self-amalgamating) Joint: Stop joint (for cross-bonding) Termination: Outdoor โ€” 66kV to 765kV Termination: GIS plug-in type (400kV) Termination: Indoor dry โ€” 66kVโ€“220kV Connector: HV compression connector Link Box: Single / solid / sectionalized SVL: Sheath voltage limiter โ€” link box Standard: IEC 62067 / IEC 60840 Brands: Prysmian, NKT, Pfisterer, ABB
Up to 765kVGIS plug-inIEC 62067Cross-bonding SVL
IEC 62067IEC 60840PGCIL
Cable lugs ferrules compression cable accessories Cu Al
Cable Lugs & FerrulesAll Sizes โ€” Cu / Al

Cable Lugs, Ferrules & Mechanical Connectors

Complete range of compression and mechanical lugs, ferrules, connectors, and glands for all cable sizes and applications

Products Available

Cu Compression Lug: Ring / Fork / Pin โ€” 0.5mmยฒโ€“1200mmยฒ Al Compression Lug: 10mmยฒ โ€“ 630mmยฒ Bi-metal Lug: Al barrel / Cu palm (Alโ€“Cu) Ferrule: Copper butt โ€” in-line join Cable Gland: PG / Metric / NPT Gland: Armoured / unarmoured / Ex-proof End Cap: PVC heat shrink cable end cap Resin Joint: Cold-pour resin (LV only) Split Bolt Connector: Parallel tap connector H-connector: Parallel groove Cu/Al Standard: IS 8309 / DIN 46235 Crimping: Hydraulic compression tool supplied
Bi-metal Al-CuIS 8309Ex-proof glands0.5โ€“1200mmยฒ
IS 8309DIN 46235BIS
โšก
Transmission Line Conductor Accessories โ€” 11kV to 765kV

Complete hardware accessories for overhead transmission and distribution lines โ€” suspension clamps, tension (dead-end) clamps, vibration dampers, bundle spacers, spacer-dampers, corona rings, arcing horns, jumper clamps, T-off connectors, armour rods, repair sleeves, and all ball / socket / clevis / eye-plate fittings. IS 2486 / IEC 61284 certified.

๐Ÿ”Œ

Suspension Clamps

  • Preformed suspension clamp (helical)
  • Bolted / armour grip suspension
  • OPGW / ADSS suspension
  • All conductor types and sizes
  • IS 2486 / IEC 61284
โš™๏ธ

Tension (Dead-End) Clamps

  • Compression dead-end clamp
  • Preformed tension clamp
  • ACSR / AAAC / HTLS / OPGW
  • Anchor clamp for ADSS
  • IS 2486 / IEC 61284
๐Ÿ”€

Vibration Dampers

  • Stockbridge vibration damper
  • HD (heavy duty) damper
  • OPGW / ADSS damper
  • All conductor sizes
  • IEC 61897
โšญ

Bundle Spacers & Spacer-Dampers

  • Rigid bundle spacer โ€” 2/3/4 bundle
  • Articulated spacer-damper
  • Sub-span oscillation control
  • 220kV, 400kV, 765kV EHV
  • IEC 61854 certified
โšŽ

Corona Rings & Arcing Horns

  • Corona protection ring โ€” Al alloy
  • Grading ring โ€” 220kV / 400kV / 765kV
  • Arcing horn โ€” inter-phase
  • Phase-to-earth arcing horn
  • IEC 60815 / CIGRE WG
๐Ÿ“‹

Ball, Socket & Clevis Fittings

  • Ball / socket โ€” 40kN to 210kN
  • Ball eye / socket clevis
  • D-shackle / anchor shackle
  • Thimble clevis / eye plate
  • IS 2315 / IEC 60120
๐Ÿ”ง

Repair & Connector Fittings

  • Repair sleeve โ€” ACSR / AAAC
  • Armour rods โ€” preformed
  • T-off tee connector โ€” live line
  • Parallel groove (PG) clamp
  • Jumper terminal clamp
๐Ÿ”Œ

OPGW / ADSS Hardware

  • OPGW dead-end tension assembly
  • OPGW suspension clamp
  • Vibration damper for OPGW
  • ADSS anchor clamp assembly
  • Splice box / closure
โ—„

Insulated Piercing Connectors

  • IPC โ€” insulation piercing connector
  • ABC aerial tap โ€” LV service
  • HV insulated tap connector
  • IS 14267 / NF C33-020
  • Maintenance-free โ€” no stripping
โš™๏ธ
Cable Management Systems & Accessories

Complete cable management for power projects โ€” GMS hot-dip galvanised cable trays, aluminium and FRP ladders, HDPE underground conduits, PVC surface conduits, cable cleats, cable ties (UV nylon), cable glands, metallic and non-metallic, labelling systems, and all cable routing accessories for solar farms, substations, wind sites, and industrial plants. IS 9537 / IEC 61537 certified.

๐Ÿ”Œ

GMS Cable Tray (HDG)

  • Perforated tray โ€” IS 4759 HDG
  • Solid bottom / ventilated
  • Width: 50mmโ€“900mm
  • Height: 50mm / 75mm / 100mm
  • IEC 61537 / IS 9537 compliant
๐Ÿ”Œ

Aluminium & FRP Tray / Ladder

  • Aluminium ladder tray โ€” lightweight
  • FRP cable tray โ€” corrosion-proof
  • Chemical-resistant FRP for outdoor
  • Anti-static FRP for hazardous areas
  • IEC 61537 certified
โކ

Underground HDPE Conduit

  • Single wall corrugated HDPE
  • Double wall โ€” smooth bore inside
  • 25mm to 200mm diameter
  • IS 14930 / IEC 61386
  • Colour coded โ€” red/orange/black
๐Ÿ“‹

PVC Conduit & Fittings

  • Rigid PVC conduit โ€” 20mmโ€“63mm
  • Flexible corrugated PVC conduit
  • Junction boxes / pull boxes
  • Couplings, bends, saddles
  • IS 9537 Part 3 / IEC 61386
๐Ÿ”ง

Cable Cleats & Clamps

  • Al cable cleat โ€” single / trefoil
  • SS cable cleat โ€” EHV trefoil
  • Plastic cable cleat โ€” LV/MV
  • Cable clamp โ€” wall / tray mount
  • IEC 61914 certified
๐Ÿ”Œ

Cable Ties & Markers

  • UV-stabilised nylon 66 cable ties
  • SS cable ties โ€” outdoor / marine
  • Cable markers โ€” heat shrink
  • Cable route markers โ€” outdoor
  • Cable tags โ€” Al / plastic
โš™๏ธ

Cable Glands

  • PG-thread / Metric / NPT type
  • Armoured cable gland โ€” A2 type
  • Ex-proof (ATEX / IECEx) gland
  • Stainless steel โ€” marine / offshore
  • IP68 rated compression glands
๐Ÿ”ฅ

Fire Stop & Sealing

  • Intumescent firestop putty pad
  • Firestop collar โ€” cable transit
  • Cable firewall penetration seal
  • Firestop spray โ€” painted on
  • IEC 60331 / BS 476 Part 20
๐Ÿ“‹

Tray Fittings & Supports

  • Tray bends โ€” 30ยฐ/45ยฐ/90ยฐ horizontal/vertical
  • Tee / cross pieces
  • Reducer / coupler
  • Wall bracket / ceiling hanger
  • Channel strut (Unistrut / Enerstrut)
๐Ÿญ Manufacturing Infrastructure

World-Class Cable Manufacturing Facility

Niccau Industries' cable manufacturing facility is equipped with precision wire drawing machines (down to 0.05mm), multi-layer planetary stranding lines, triple-extrusion XLPE dry-cure lines for MV/HV cables, high-speed insulation extrusion lines for FR/FRLS/LSZH compounds, conductor stranding with correct-lay machinery, overhead conductor bunching/stranding for ACSR/AAAC, and in-house conductor annealing and galvanising facilities.

Our state-of-the-art testing laboratory performs full IS and IEC type tests in-house โ€” conductor resistance, spark testing, partial discharge (for MV/HV cables), high voltage AC/DC test, insulation resistance, LSZH smoke and halogen tests, and mechanical property testing โ€” ensuring every cable batch is certified before despatch.

XLPE dry-cure: Nitrogen-cured CCV line | Partial discharge <2pC (MV) <1pC (HV) | 100% spark test on all LV cables | Tension test: Pull-out >IEC minimum | BIS in-house test lab NABL accredited

NABLAccredited Test Lab
100%Spark Tested (LV)
<2pCPD Level โ€” MV Cables
ISO9001:2015 QMS Certified
โš™๏ธ

Wire Drawing Machines

Fine and medium wire drawing โ€” Cu and Al โ€” from 8mm rod to final conductor wire diameter in multiple passes

๐Ÿ”€

Conductor Stranding

Planetary stranding for Cu power cables and tubular stranding for ACSR/AAAC overhead conductors โ€” all class 1 to 5

๐Ÿ”ฅ

Triple Extrusion XLPE (CCV)

Catenary continuous vulcanisation (CCV) dry-cure nitrogen line for triple-extrusion XLPE MV and HV cables โ€” <2pC PD

๐Ÿญ

FR / FRLS / LSZH Extrusion

High-speed single and tandem extrusion lines for FR PVC, FRLS, ZHFR, and XLPO insulation and sheathing compounds

โšก

100% Spark Testing

Continuous inline spark testing of every metre of LV insulated cable at 2kVโ€“15kV โ€” zero defect despatch commitment

๐Ÿ“ท

Partial Discharge Lab

NABL-accredited in-house PD testing for MV (<2pC) and HV (<1pC) XLPE cables โ€” mandatory for every manufactured drum

๐Ÿ”ฅ

HV / EHV Test Bay

High voltage AC and DC test bay for routine and type testing of HV cables up to 765kV โ€” full IEC 60840 test capability

๐ŸŒ

Drum Winding & Export Pack

CNC controlled drum winding for correct tension โ€” sea-freight rated wooden drums for export via DomEx TradLink

cable extrusion production line manufacturing
wire drawing stranding cable factory
cable testing laboratory HV spark test
cable drum winding despatch quality control
cable drum winding despatch quality control
cable drum winding despatch quality control
cable drum winding despatch quality control
cable drum winding despatch quality control

Manufacturing facility photographs

Standards & Certifications

Certified to Every Indian & International Standard

Every cable manufactured by Niccau Industries carries the applicable IS, IEC, BIS, and international certification โ€” making our cables eligible for government tenders (SECI, NTPC, PGCIL), DISCOM projects, institutional financing (IREDA, PFC), and export to 54+ countries through DomEx TradLink.

โœ…
IS 694 : 2010
BIS โ€” PVC Insulated Cables up to 1100V

Primary Indian standard for FR / FRLS / LSZH house wiring and building cables โ€” mandatory BIS certification for all wires sold in India.

House Wiring & Building
โœ…
IS 1554 Part 1
PVC Insulated LV Cables to 1100V

Indian standard for PVC insulated and sheathed cables for LV power distribution, industrial feeders, and panel wiring up to 1100V.

LV Industrial Cables
โœ…
IS 7098 Part 1
XLPE Insulated LV Power Cables

XLPE and XLPE/PVC insulated armoured and unarmoured LV cables โ€” standard for all industrial LV cable supply to Indian projects.

LV XLPE Armoured
โœ…
IS 7098 Part 2
XLPE Insulated MV Cables 3.3kVโ€“33kV

Indian standard for XLPE insulated underground MV power cables โ€” covering 3.3kV, 6.6kV, 11kV, 22kV, and 33kV โ€” Cu and Al conductors.

MV Underground 3.3โ€“33kV
โœ…
IS 7098 Part 3
XLPE Insulated HV Cables 66kV+

Indian standard for XLPE HV underground cables โ€” 66kV, 132kV, and above โ€” used for PGCIL and DISCOM underground EHV cable projects.

HV / EHV Underground
โœ…
IS 8130 : 1984
Conductors for Insulated Cables

Indian standard for copper and aluminium conductors used in insulated cables โ€” covering stranding, resistance, and dimensional requirements.

All Cable Conductors
โœ…
IS 398 Parts 1โ€“5
Overhead Conductors โ€” ACSR / AAAC / AAC

Complete Indian standard covering all overhead conductor types โ€” AAC (Part 1), ACSR (Part 2), ACAR (Part 3), AAAC (Part 4) โ€” for 11kV to 765kV lines.

Overhead Conductors All Types
๐ŸŒ
IEC 60502-1 & -2
Extruded Power Cables LV & MV

International standard for extruded insulation power cables โ€” Part 1 (LV up to 1kV) and Part 2 (MV 1kV to 30kV) โ€” governs XLPE cable design and testing.

LV / MV Cables โ€” Export
๐ŸŒ
IEC 60840 & 62067
HV & EHV Extruded Cables 30kVโ€“500kV+

International standards for HV (IEC 60840: 30kVโ€“150kV) and EHV (IEC 62067: 150kVโ€“500kV+) XLPE cables โ€” type test and pre-qualification test requirements.

HV / EHV Cables
๐ŸŒ
IEC 62930 / TรœV 2PfG 1169
Solar PV DC Cables โ€” 1500V DC

International standard for solar PV DC cables โ€” covering UV resistance, XLPO insulation, tinned copper conductor, 1000V and 1500V DC rating, and โ€“40ยฐC to +90ยฐC temperature range.

Solar DC String & Trunk
๐ŸŒ
IEC 61089
Round Wire Concentric Lay Conductors

International standard for overhead line conductors โ€” ACSR, AAAC, ACAR, AAC โ€” covering electrical, mechanical, and dimensional properties for all voltage classes.

Overhead Conductors โ€” Export
โœ…
IS 13573
Underground Cable Accessories โ€” LV to HV

Indian standard for cable jointing and termination accessories โ€” covering heat shrink, cold shrink, pre-moulded joints and terminations for LV to HV applications.

UG Cable Accessories
๐ŸŒ
IEC 61442
Test Methods for Cable Accessories

International test methods for cable accessories โ€” type testing of joints and terminations for MV and HV cables โ€” dielectric withstand, impulse, and short circuit tests.

Cable Joints & Terminations
๐ŸŒ
IEC 61284
Overhead Line Fittings โ€” Requirements & Tests

International standard for conductor hardware fittings โ€” suspension clamps, tension clamps, vibration dampers, spacers, and corona rings โ€” IS 2486 Indian equivalent.

TL Hardware Accessories
โœ…
BIS / IS Certification
Bureau of Indian Standards โ€” All Products

All Niccau Industries cable products carry BIS IS certification โ€” mandatory for Indian market supply, government tenders, and SECI/NTPC/DISCOM procurement.

All Products โ€” India Mandatory
โœ…
ISO 9001:2015
Quality Management System โ€” Manufacturing

Niccau Industries' manufacturing facility is ISO 9001:2015 certified โ€” ensuring consistent quality management from raw material procurement through finished cable despatch.

Manufacturing QMS
Why Niccau Industries Cables

The Niccau Industries Cable Advantage

One cable manufacturer. Every voltage. Every application. Backed by BARREL Group's 5,000 MW project pipeline as the anchor customer โ€” delivering consistent quality, competitive pricing, and traceable documentation for every order.

๐Ÿญ

0.5mmยฒ to 765kV

The widest cable range from any single Indian manufacturer โ€” from house wiring wire to 765kV EHV underground cable under one quality system and one factory.

โœ…

BIS + NABL Certified

Every cable is BIS IS certified and tested in our NABL-accredited in-house laboratory โ€” full type test and batch test documentation with every order.

๐Ÿ›๏ธ

BARREL 5,000 MW Pipeline

BARREL Group's own project pipeline is the anchor customer โ€” Niccau cables are proven in real Indian projects, not just laboratory tested.

๐Ÿ“‹

Full Traceability

Every drum: batch MTC, conductor resistance test, insulation resistance, spark test report, and drum continuity test โ€” all delivered with the cable.

๐Ÿ”Œ

Project BOM Supply

Submit your project BOM โ€” we supply all cable types (DC, LV, MV, HV, control, fibre, earth) under a single purchase order and delivery schedule.

๐ŸŒ

Export via DomEx

Cables exported to 54+ countries through DomEx TradLink โ€” sea-freight packed wooden drums, CE / IEC export documentation, and LC/FOB/CIF terms.

๐Ÿ“ˆ

Competitive Bulk Pricing

Group-scale raw material procurement โ€” copper, aluminium, XLPE compound โ€” delivers competitive per-metre pricing even for small project orders.

โš™๏ธ

Custom Cable Solutions

Custom cable specifications โ€” special insulation compounds, non-standard voltage ratings, custom colours, special armour โ€” engineered to your project requirement.

๐Ÿ“ฆ Request a Quote

Get a Quote for Any Cable or Cable Accessory

From a 100-metre coil of house wiring wire to 500 km of 765kV EHV conductor for a national transmission project โ€” our technical team responds within 24 hours with specifications, pricing, and delivery schedule. For project BOM, email directly to cables@niccau.com for a 24-hour comprehensive quote.

๐Ÿ”Œ

Cable Sales โ€” India & Export

cables@niccau.com | sales@barrel.energy

๐Ÿ“‹

Project BOM Supply

Email BOM to cables@niccau.com โ€” 24-hr comprehensive quote

๐ŸŒ

Export Enquiries

export@domextradlink.com โ€” DomEx TradLink

๐Ÿ“ฆ Cable & Accessories Enquiry

Share your requirement and receive specifications and pricing within 24 hours.

๐Ÿ”’ Confidential โ€” For project BOM, email to bom@niccau.com for a 24-hour quote

๐Ÿ”Œ Niccau Industries Limited โ€” Cable & Cable Accessories

0.5mmยฒ TO 765kV.
EVERY CABLE. EVERY APPLICATION. ONE MANUFACTURER.

From a single coil of FR PVC house wiring wire for a home renovation, to 500 km of ACSR Moose conductor for a national transmission line, to 100 km of 400kV EHV XLPE cable for a PGCIL underground grid project โ€” Niccau Industries manufactures, certifies, and delivers. Every cable BIS certified. Every drum fully documented. Every project on time. Manufactured by Niccau Industries Limited โ€” associate of BARREL, a StenJaan Group company. Exported worldwide through DomEx TradLink.

Solar Modulesย ยทย  Inverter / UPSย ยทย  Structureย ยทย  Cable & Cable Accessoriesย ยทย  Tracking Systemsย ยทย  Transformersย ยทย  BoS for Power Sector

ยฉ Niccau Industries Limited โ€” Cable Division | Associate of BARREL / StenJaan Group | Export: DomEx TradLink

Main Menu